B.O.D. Incubator

From our extensive range of testing equipments, we manufacture, export and supply supreme quality B.O.D. Incubator that is simply use in labs, R & D for determination applications like bacteriological and bio chemical oxygen tests. The offered incubator is efficiently manufactured using superior quality component and pioneering technology under the proper direction of our diligent professionals. Our provided incubator is offered in distinct specifications as per the specific demands of our prestigious clients. This B.O.D. Incubator can be availed from us at industry leading prices.

  Features:

B.O.D. Incubator (Low temp.)

Double walled, inner made of Stainless Steel 304 quality, outer made of thick best quality Mild Steel the surface of which is primer coated for anti rusting and is duly white stoved powder coated paint. Insulation between inner and outer wall is done with 75mm thick glasswool to prevent any heat loss. Inner chamber is provided with 2/3 nos. perforated stainless steel shelves with ribs to adjust the shelves at desirable height.

Provided with double door, inner made of thick transparent full view glass and outer door is double walled metallic properly insulated with glass wool and also provided with best quality handle, gasket, lock, etc. Provided with door operated illumination lamp. Whole unit is mounted on castor wheels. Temp. Range is from 5°C to 60°C and is controlled by Electronically controlled by Digital temperature Indicator cum Controller with PT-100 sensor.

This controller is provided with time delay relay to control the accuracy in maintaining the temperature. Temp. is maintained with and accuracy of ± 0.5°C. Cooling is done with ISI Mark compressor of KIRLOSKAR make which is connected to thick copper coils placed in the rear of the chamber through condenser, fan motor, capacitor, relay etc. Whole cooling unit is placed below the main chamber in a GI housing. CFC Free, Environment friendly. Heating is done with ISI mark strip type heaters placed near the cooling coils. Air is circulated by 2-nos. ISI mark Silicon binded motors, which are connected to balanced blowers, which operates alternatively and continuously with heating and cooling. Provided with On/Off switch, Indicator, Digital Controllers, etc.

The following optional arrangements can be made in each model of BOD Incubator.
BOD Incubator with interior illumination with 3 number fluorescent tube of 60 mm length placed vertically along the back wall. Minimum temperature can be obtained from 10°C to 50°C when all the tubes are on at the extra.

The arrangement cannot be made in 4 cu. ft. BOD incubator.